SPECIALIzED Products
specialized
Products
BITUMEN ALUMINIUM
BA00
Classic, bitumen based, long-life, interior/exterior, high shine aluminum coating for a wide range of substrates/objects that need a highly durable and humidity resistant but cost-effective aluminum finish.
Application Areas
• Interior and exterior use.
• Primed, rusted or new metal.
• Fibre cement and roofing felt covered roofs, especially in humid coastal conditions.
• NEO Bitumen Aluminium is the ideal coating material for objects in or around water purification or reclamation works, as well as for manufacturing plants where a lot of water or humidity prevails.
• Due to the excellent UV light and humidity resistance, NEO Bitumen Aluminium is highly suitable for roofs in wet coastal conditions.
Product Features
• Highly durable, humidity and UV resistant for the harsh Namibian climate.
• Excellent adhesion to a range of properly prepared substrates.
• Very cost effective.
• Two coats of NEO Bitumen Aluminium are used for best results.
• Bitumen based coatings should not be painted on the inside of containers used for storage of drinking water.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Bitumen Aluminum is ready for use un-thinned; thinning with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00) will reduce its hiding power. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). |
| • Cleaning | NEO Enamel Thinner (et01). |
| • Application | • Stir well before use. • Two coats of NEO Bitumen Aluminium are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Aluminium. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Clean up application equipment with NEO Enamel Thinner (et01). • NEO Bitumen Aluminium is ready for use un-thinned; thinning will reduce its hiding power. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 8-10 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Only apply in well ventilated areas and keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Remove any rust, mill scale • • With • Allow • With |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying the whole substrate is coated with NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • With • Allow • With |
| • Fibre Cement Surfaces and Roofing Felt | • Remove any flaking, peeling and loose paint from the roof surface. • Wash off dust and mica particles with a hosepipe and by scrubbing with a hard broom. • Carry out repairs if required. • Allow • With • Allow • With |
| • Primed Metal and Previously Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth preferably with a • Bare metal areas need to be spot primed with NEO Corroguard (cg00). • With • Allow • With |
Colour Range and Quantities
• NEO Bitumen Aluminium is available in shiny Aluminium only.
• Available in 1 litre, 5 litres and 20 litres.
Precautions
• NEO Bitumen Aluminium is highly flammable and has a flashpoint of 37 degrees Celsius.
• Only apply in well-ventilated areas.
• Do not eat, drink or smoke while applying.
• Do not coat the inside of containers or water storage tanks with this product.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
BITUMEN BLACK
BB00
Classic, bitumen based, long-life, high water resistant black coating for a wide range of substrate/objects that need high water and humidity resistant but cost-effective finish.
Application Areas
• Interior and exterior use.
• Primed metal and other substrates/roofs, especially in humid coastal areas.
• The product is for use on plaster, concrete, fiber cement and steel.
• NEO Bitumen Black is a cost-effective waterproofing material for waterproofing house foundations, retaining walls and similar structures.
• For use on steel, concrete and
• NEO Bitumen Black is used to revive old, weathered roofing felt.
Product Features
• Highly durable and humidity resistant for the harsh Namibian climate.
• Excellent adhesion to a range of properly prepared substrates.
• Very cost effective.
• NEO Bitumen Black is used to saturate and revive roofing felt, which has been exposed to the environment for some time. Roofs prepared this way can later be recoated with NEO Heat Reflective Roof Paint (arh00).
• Two coats of NEO Bitumen Black are used for best results.
• For objects such as retaining walls three to four coats of NEO Bitumen Black are recommended.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). |
| • Cleaning | NEO Mineral Turpentine (mt00) or NEO Enamel Thinner (et01). |
| • Application | • Stir well before use. • Two coats of NEO Bitumen Black are used for best results. For objects such as retaining walls three to four coats are recommended. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Black. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • NEO Bitumen Black is ready for use un-thinned; thinning will reduce its effectiveness. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 5-7 square metres per litre for the first coat and 6-8 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Only apply in well ventilated areas and keep away from all ignition sources, flames and sparks. • Clean up application equipment with NEO Mineral Turpentine (mt00) or NEO Enamel Thinner (et01). • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Remove any rust, mill scale and greasy substances from metal surface. • Sand blast back to bright metal and spot prim with NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Black. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying the whole substrate is coated with NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Black. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Plaster, Concrete, Fibre Cement Surfaces and Roofing Felt | • Plaster must be firm and solid. • Remove any flaking, peeling and loose paint from the surface. • Wash off dust and mica particles with a hosepipe and by scrubbing with a hard broom. • Carry out repairs if required. • Allow to dry. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Black. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • No primer coat is required. |
| • Primed Metal and Previously Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth preferably with a high pressure cleaner. • After drying the whole substrate is coated with NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • With brush, roller or airless spray, apply a generous coat of NEO Bitumen Black. Thin for spray 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Bitumen Black is available in Black only.
• Available in 1
Precautions
• NEO Bitumen Black is highly flammable and has a flashpoint of 37 degrees Celsius.
• Only apply in well-ventilated areas.
• Do not eat, drink or smoke while applying.
• Avoid inhalation of solvent vapors.
• Do not use for objects that contain drinking water.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
CATTLEMARKING
CM00
NEO
Application Areas
• Livestock hides and skins.
Product Features
• Easy to use.
• Excellent visibility.
• Excellent adhesion to hairs and the skin surface.
• Easy
• Quick drying, water resistant and will not rub off for weeks.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Paintbrush. |
| • Thinning | NEO |
| • Cleaning | Water. |
| • Application | • Stir well before use. • NEO • Using a paintbrush, apply one thick coat of NEO • Use only in well ventilated areas. • Do not eat, drink or smoke while applying. • Clean up application equipment is with water. |
Surface Preparation
• Livestock Hides and Skins:
• The animals to be marked should be dry and free of dust.
• Apply one thick coat of NEO
Colour Range and Quantities
• NEO
• Available in 1
Precautions
• NEO
• The product is flammable.
• Use only in
• Do not eat, drink or smoke while applying.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
DUR ROADMARKING
RM00
A classic, modified alkyd based, interior/exterior, low sheen road marking finish for unpainted bricks, cement, concrete, stone, bituminous and tarmac road surfaces to protect substrates from abrasion, rain, and sun. Meets the rigorous requirements of SABS 731 Type 1.
Application Areas
Bricks, cement, concrete, stone, bituminous and tarmac road surfaces on roads, airfields, parking areas
Product Features
• High abrasion resistance and durability.
• Excellent adhesion to a range of properly prepared road surface types.
• NEO Dur Roadmarking contains highly reflective minerals for high visibility in parking and other areas.
• Meets SABS 731 Type 1 standards.
• Suitable for machine application as well as with a paint roller or brush.
• Serves as a base coating for the application of reflective glass beads.
• Available in the different shades required by municipalities and road authorities.
• One coat of NEO Dur Roadmarking is used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Suitable for machine application as well as with a paint roller or brush. |
| • Thinning | NEO Dur Roadmarking is ready for use un-thinned; thinning with NEO Toluol (tl00) will reduce its efficacy/hiding power. Only in case of machine application, thin with NEO Toluol (tl00). |
| • Cleaning | NEO Toluol (tl00). |
| • Application | • Stir well before use. • One coat of NEO Dur Roadmarking is used for best results. • With brush, roller or spray, apply a generous coat of NEO Dur Roadmarking. • NEO Dur Roadmarking is ready for use un-thinned; thinning will reduce its efficacy/hiding power. NEO Toluol (tl00) should be added only in case of machine application. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 2-4 square metres per litre for the first coat and 5-7 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Clean up application equipment with NEO Toluol (tl00). • Only apply in well ventilated areas. • This material is highly flammable. Keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
|
• Uncoated Concrete, Cement, Stone • Tarmac and Bitumen • Previous road markings |
• Substrate must be completely dry and free of dust. • Remove all dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with a suitable flexible sealant. • Remove any old flaking paint coatings. • Apply one coat of NEO Dur Roadmarking to cover substrate well. • For use on concrete, two applications are recommended. • No primer is required. |
Colour Range and Quantities
• NEO Dur Roadmarking is available in White, Yellow, Red and Black.
• Available in 1 litre, 5 litres, 20 litres and 200 litres.
Precautions
• NEO Dur Roadmarking is highly flammable.
• Keep away from all ignition sources, flames and sparks.
• Only apply in well ventilated areas.
• Avoid inhaling vapours. Constant inhaling of vapours can lead to drowsiness. Expose person to fresh air and symptoms will disappear.
• Do not eat, drink or smoke while applying.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
EPOXY FLOOR PAINT
2 COMPONENT
EYF00
NEO Epoxy Floor Paint is based on a pure epoxy resin and cured with a polyamide resin. It is a classic, 2-pack interior, abrasion resistant, high gloss floor coating for those very high traffic areas that need a high abrasion, water and chemical resistant coating in a range of
Application Areas
• Interior use or shaded areas only. The product is NOT suitable for use on the exterior that is exposed to sunlight.
• Dry (15% moisture maximum) concrete/cement floors.
• Concrete or cement garage and workshop floors.
• Do not use on wooden floors except when the floor is new and not yet coated with floor paint.
Product Features
• Highly abrasion and chemical resistant.
• Highly washable and cleanable.
• High hiding power and film build.
• NEO Epoxy Floor Paint is based on a pure epoxy resin and cured with a polyamide resin. The pigmentation is formulated to achieve an excellent abrasion resistance and long wear. It is a twin pack system and the catalyst must be added to the base paint before application.
• Epoxy resins are not suitable for direct exposure to sunlight. They should only be used indoors or on shaded areas. It is very important to prepare the substrate properly. New concrete floors must be well cured, firm, oil and grease free and completely dry.
• After application allow three days drying before driving vehicles on surface.
• Floors coated with NEO Epoxy Floor Paint can easily be kept clean by washing the floor with warm soap water or other household detergents. If severely soiled, use a high pressure or steam cleaner, it will not damage the coating.
• Old workshop floors, which are saturated with oil and grease, cannot be coated. Cleaning with solvents and degreasers will only remove the oil out of the top layer and the oil from the lower sections will rise to the surface and the coating will lose its adhesion.
• Two to three coats of NEO Epoxy Floor Paint are used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Mix the epoxy base with the polyamide curing agent in the correct ratio. Paintbrush, mohair roller or airless spray application. |
| • Thinning | NEO Epoxy Thinner (et02). |
| • Cleaning | NEO Epoxy Thinner (et02). |
| • Application | • Stir well before use. • The floor area must be clean and dry. The humidity content should be checked if there is any doubt. • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes epoxy base to 1 volume polyamide curing agent. Mix for 5 to 10 minutes. For very porous floors add 5-10% NEO Epoxy Thinner (et02). • Two to three coats of NEO Epoxy Floor Paint are used for best results. • With paintbrush or mohair roller, apply a generous coat of NEO Epoxy Floor Paint. • Allow to dry for 18 to 24 hours but no longer than 48 hours before recoating. • With paintbrush, roller or airless spray, apply a second generous coat (undiluted). • Clean up application equipment with NEO Epoxy Thinner (et02). • Only apply in well ventilated areas. Keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously epoxy painted substrates. • Do not apply before 09:00 and after 16:00 in the winter or when the temperature will exceed 15 degrees Celsius for the drying period. If the temperature is below 15 degrees Celsius for the drying period, a soft un-dried film will result. • Interior or shaded areas only. |
Surface Preparation
| • Dry Uncoated Concrete and Cement Surfaces | • Remove all dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with a suitable flexible sealant. • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes epoxy base to 1 volume polyamide curing agent. Mix for 5 to 10 minutes. For very porous floors add 5-10% NEO Epoxy Thinner (et02). • With paintbrush or mohair roller, apply a generous coat of NEO Epoxy Floor Paint. • Allow to dry for 18 to 24 hours but no longer than 48 hours before recoating. • With paintbrush, roller or airless spray, apply a second generous coat (undiluted). |
| • Previously Epoxy Painted Surfaces | • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Sand well to the next coat. • IMPORTANT: This product or any epoxy based coating is not recommended for old • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes epoxy base to 1 volume polyamide curing agent. Mix for 5 to 10 minutes. For very porous floors add 5-10% NEO Epoxy Thinner (et02). • With paintbrush or mohair roller, apply a generous coat of NEO Epoxy Floor Paint. • Allow to dry for 18 to 24 hours but no longer than 48 hours before recoating. • With paintbrush, roller or airless spray, apply a second generous coat (undiluted). |
Colour Range and Quantities
• NEO Epoxy Floor Paint is available in a limited range of popular ready-mixed
• Available in 1 liter and 5 liters (2 pack containers).
Precautions
• NEO Epoxy Floor Paint is highly flammable.
• Use only in
• Polyamide resins can cause slight skin irritations. Wear gloves and goggles during application. Should skin contact occur, wash affected areas with water and soap.
• NEO Epoxy Floor Paint contains no toxic substances.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
FLOOR PAINT
ALKALINE RESISTANT
FP00
A new generation polyurethane, interior, semi-gloss floor coating for those high traffic areas that need a highly washable, alkaline and abrasion resistant coating in a range of
Application Areas
• Interior or shaded areas only. The product is NOT suitable for use on the exterior that is exposed to sunlight.
• New or old concrete floors.
• Dry (moisture level 15% maximum) cement floors.
• Primed metal and wooden substrates.
Product Features
• Highly washable, cleanable, humidity and abrasion resistant.
• Excellent adhesion to a range of properly prepared dry flooring substrates.
• High hiding power and film build.
• Alkaline resistant when applied to dry cement floors (moisture level 15% max).
• NEO Floor Paint is easy to apply and at any time re-coatable with little effort.
• For first time application two coats of NEO Floor Paint are used for best results.
• NEO Floor Paint is resistant to household detergents, water and other substances used in a household and kitchen. However, the product is not resistant to petrol and mineral oil and should not be used in garages and workshops. For this purpose we recommend NEO Epoxy Floor Paint (eyf00).
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Paintbrush or mohair roller application. |
| • Thinning | NEO Mineral Turpentine (mt00). |
| • Cleaning | NEO Mineral Turpentine (mt00). |
| • Application | • Stir well before use. • Two coats of NEO Floor Paint are used for best results. • With paintbrush or mohair roller, apply a generous coat of NEO Floor Paint. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow to dry 18-24 hours before recoating. • With paintbrush or roller, apply a second generous coat (undiluted). • Clean up application equipment with NEO Mineral Turpentine (mt00). • Only apply in well ventilated areas. Keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 8-10 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Do not apply before 09:00 and after 16:00 in the winter. • Interior or shaded areas only. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corroguard (cg00) or NEO Corrotec (ct00). • With paintbrush or mohair roller, apply a generous coat of NEO Floor Paint. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow to dry 18-24 hours before recoating. • With paintbrush or roller, apply a second generous coat (undiluted). |
| • Mild Steel (New) | • Surfaces need to be abrasively degreased to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying, the whole substrate is coated with NEO Corroguard (cg00) or NEO Corrotec (ct00). • With paintbrush or mohair roller, apply a generous coat of NEO Floor Paint. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow to dry 18-24 hours before recoating. • With paintbrush or roller, apply a second generous coat (undiluted). |
| • New Wooden Floors | • Remove all dust and foreign material. • With paintbrush or mohair roller, apply a generous coat of NEO Floor Paint. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow to dry 18-24 hours before recoating. • With paintbrush or roller, apply a second generous coat (undiluted). |
| • Dry (15% Moisture Maximum) Uncoated Concrete Surfaces and New Concrete Floors | • Remove all dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with a suitable flexible sealant. • Make sure screed is solid, firm and dry. • With paintbrush or mohair roller, apply a generous coat of NEO Floor Paint. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow • With paintbrush or roller, apply a second generous coat (undiluted). |
| • Previously Painted Surfaces | • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Allow to dry. • With paintbrush or mohair roller, apply a generous coat of NEO Floor. The first coat may be diluted with approximately 5% NEO Mineral Turpentine (mt00). • Allow to dry 18-24 hours before recoating. • With paintbrush or roller, apply a second generous coat (undiluted). |
Colour Range and Quantities
• NEO Floor Paint is available in Tile Red, Medium Grey, Sandstone Brown
• Available in 1
Precautions
• NEO Floor Paint is highly flammable and has a flashpoint of 37 degrees Celsius.
• Use only in
• This product contains no toxic substances.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
GRAFFITEX
PROTECTIVE COATING
GT00
NEO Graffitex is a novel and innovative acrylic water-based, interior, clear glossy coating of exceptional surface hardness. The product contains Teflon for a smooth and scratch resistant surface. Use NEO Graffitex on surfaces coated with water-based paint to protect substrates and minimize dirt collection.
Application Areas
• Interior or shaded areas only. The product is NOT suitable for use on the exterior that is exposed to sunlight.
• On sound, clean water-based emulsion paint coatings.
• Use NEO Graffitex on surfaces coated with water-based paint to protect substrates and minimize dirt collection.
• The product is an ideal clear protective coating for PVA emulsion paint in schools and public buildings.
• NEO Graffitex is not recommended for use on floors or exterior surfaces – use NEO Stone Sealer (ss11p00) instead.
Product Data
| Resin Base | Acrylic resin emulsion |
| Drying Time | Touch dry: ± 30 min Hard dry: ± 2 hours |
| Solid Matter by Content | By mass: 25% |
| Film Thickness | ± 20 microns |
| Spreading Rate | 10-14 square metres per litre. Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 10-12 square |
| Surface Appearance | Glossy |
Product Features
• Impedes dirt collection.
• Excellent adhesion to water-based coatings.
• Improves film hardness, abrasion resistance, and cleanability.
• Two to three coats of NEO Graffitex are used for best results.
• Should be used interiors only. It may be used on the exterior of buildings in passages etc. that are well covered up. Direct sunlight will deteriorate the coating.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Paintbrush or roller. |
| • Thinning | NEO Graffitex is ready for use un-thinned; thinning with water will reduce its effectiveness. |
| • Cleaning | Water. |
| • Application | • Stir well before use. • NEO Graffitex is ready for use un-thinned; thinning with water will reduce its effectiveness. • Two to three coats of NEO Graffitex are used for best results. • With brush or roller, apply a generous coat of NEO Graffitex. • Allow to dry 6-8 hours before recoating. • With brush or roller, apply a second or third generous coat as required. • Clean up application equipment with water. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 10-12 square metres per litre for the first coat and 12-14 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Interior or shaded areas only. • Do not apply before 09:00 and after 16:00 in the winter. |
Surface Preparation
| • On Sound, Clean Water Based Emulsion Paint Coatings (Previously Painted Surfaces) | • Remove all dust, foreign material, fungal and algae growth. • Allow to dry. • With brush or roller, apply a generous coat of NEO Graffitex. • Allow to dry 6-8 hours before recoating. • With brush or roller, apply a second or third generous coat as required. |
Colour Range and Quantities
• NEO Graffitex is a clear,
• Available in 1 litre and 5 litres (20 litres on special order).
Precautions
• NEO Graffitex is flammable but contains no toxic substances.
• NEO Graffitex is not recommended for use on floors or exterior surfaces – use NEO Stone Sealer (ss11p00) instead.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
HEAT REFLECTIVE ROOF PAINT
ARH00
NEO Heat Reflective Roof Paint is a water-based, acrylic, durable roof coating with heat reflective abilities.
Application Areas
• Cement tiles, new or weathered.
• Fibre cement sheeting, new or weathered.
• Plaster.
• Previously painted substrates.
• Primed metal and wooden substrates.
Product Features
• NEO Heat Reflective Roof Paint, especially when white or in pastel shades, reduces the temperature in especially buildings with metal roofs considerably. It contains reflective minerals, which reflect infrared light rays from the surface of the coating. This results in a considerable reduction in the roof surface temperature and consequently the room temperatures.
• Highly durable and UV resistant for the harsh Namibian climate.
• Highly water resistant.
• Excellent adhesion.
• Low odour.
• Quick drying – two coats can be applied in one day.
• If correctly applied to a properly prepared substrate, the product has a life expectancy of 5 to 7 years, possibly longer. The use of the reflective minerals has a positive effect on the lifespan of the roof coating. Not only infrared but also harmful UV rays are reflected, thus slowing down the degradation of the coating.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Heat Reflective Roof Paint is ready for use un-thinned; thinning with water will reduce its hiding power. |
| • Cleaning | Water. |
| • Application | • Stir well before use. • Two coats of NEO Heat Reflective Roof Paint are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 8-10 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • NEO Heat Reflective Roof Paint is ready for use un-thinned; thinning with water will reduce its hiding power. • Clean tools immediately after use with clean tap water. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) • Galvanised Roofs • Harvey Tiles • Corrotec |
NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • Remove collected sand and dust from the roof. • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) • Harvey Tiles |
• Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • Wash down complete roof with a mixture of one part NEO Metal Conditioner (mc00) and three parts of water. • Rinse well with potable water. • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • No primer is required BUT one to two coats of NEO Corroguard (cg00) are recommended for the very harsh coastal regions. • Acrylic resin emulsions adhere excellently on to galvanised metal. |
| • Chromadeck | • Sand lightly and remove all loose particles. • Apply one coat of NEO Corrotec (ct00) or NEO Corroguard (cg00). • Allow to dry for 24 hours. • Apply two coats of NEO Heat Reflective Roof Paint. |
| • Uncoated cement tile surfaces | • Remove dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with NEO Repair Paste (nrp07). • Apply one coat of NEO Bonding Liquid (ig00) to cover NEO Repair Paste (nrp07). • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Roofing Felt | • NEO Heat Reflective Roof Paint can be applied directly on to the roofing felt surface. • In general there are no problems to be encountered when painting new material. • Old roofing felt where the paint coating is flaking and loose can be difficult to repaint. With such roofs, expert advice is required to assess the condition of the roofing felt. • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Previously Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Allow to dry. • If then powdery or friable, seal with NEO Bonding Liquid (ig00). • With brush, roller or airless spray, apply a generous coat of NEO Heat Reflective Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Heat Reflective Roof Paint is available in Cool roof and White only.
• Available in 5 liters and 20 liters.
Precautions
• NEO Heat Reflective Roof Paint is not flammable, contains no toxic substances and only low levels of VOC (EU regulations).
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
HEAT RESISTANT
ALUMINIUM & BLACK
HR00/HR01
A new generation silicone resin based, long-life, interior/exterior, high shine aluminum & black heat resistant coating for a wide range of substrates/ objects that need a highly durable and heat resistant but cost-effective finish. Heat resistance: 200 degrees Celsius for long periods; 250 degrees Celsius for short periods.
Application Areas
• Interior and exterior use.
• Primed metal and other substrates.
• The coating can be used on boilers, steam pipes, metal chimneys and other objects with a hot surface.
Product Features
• Highly durable and UV resistant for the harsh Namibian climate.
• Excellent adhesion to
• Very heat resistant for long term exposure to temperatures of up to 200 degrees Celsius (250 degrees Celsius for short periods).
• NEO Heat Resistant should not be used on exhaust pipes or other extremely hot objects.
• Two coats of NEO Heat Resistant are used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Heat Resistant is ready for use un-thinned; thinning with NEO M-Thinner (mt01) will reduce its hiding power. Only for spray application, thin 20% with NEO M-Thinner (mt01). |
| • Cleaning | NEO M-Thinner (mt01). |
| • Application | • Stir well before use. • NEO Heat Resistant is ready for use un-thinned; thinning will reduce its hiding power. • Two coats of NEO Heat Resistant are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Heat Resistant. Only for spray application, thin 20% with NEO M-Thinner (mt01). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 8-10 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Only apply in well ventilated areas and keep away from all ignition sources, flames and sparks. • Clean up application equipment with NEO M-Thinner (mt01). • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corrotec (ct00). • DO NOT USE ANY OTHER TYPE OF PRIMER, ONLY NEO CORROTEC (ct00) IS HEAT RESISTANT AND SHOULD BE USED. • With brush, roller or airless spray, apply a generous coat of NEO Heat Resistant. Only for spray application, thin 20% with NEO M- Thinner (mt01). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying the whole substrate is coated with NEO Corrotec (ct00). • DO NOT USE ANY OTHER TYPE OF PRIMER, ONLY NEO CORROTEC (ct00) IS HEAT RESISTANT AND SHOULD BE USED. • With brush, roller or airless spray, apply a generous coat of NEO Heat Resistant. Only for spray application, thin 20% with NEO M- Thinner (mt01). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Previously Painted Surfaces | • Remove all of the previous coatings with NEO Paint Remover (pr00). • Wash off and allow to dry. • Prime metal with NEO Corrotec (ct00). • DO NOT USE ANY OTHER TYPE OF PRIMER, ONLY NEO CORROTEC (ct00) IS HEAT RESISTANT AND SHOULD BE USED. • With brush, roller or airless spray, apply a generous coat of NEO Heat Resistant. Only for spray application, thin 20% with NEO M- Thinner (mt01). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Heat Resistant is available in shiny Aluminium and Black only.
• Available in 500ml, 1 litre and 5 litres.
Precautions
• NEO Heat Resistant is highly flammable and has a flashpoint of 37 degrees Celsius.
• Only apply in
• Do not eat, drink or smoke while applying.
• This product should not be used to coat extremely hot substrates such as car exhausts etc. as the product will break down.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
INDUSTRIAL ALUMINIUM
IA00
Classic modified oil and hydrocarbon resin based, long-life, interior/exterior, high shine aluminum coating for a wide range of substrates/objects that need a highly durable coating in an aluminum finish.
Application Areas
• Interior and exterior use.
• NEO Industrial Aluminium is for use on fences, balustrades, general steel work, pipes and valves, tanks, on wood, canvas and other objects which require a silver shine.
Product Features
• Highly durable and UV resistant for the harsh Namibian climate.
• Excellent adhesion to a range of properly prepared substrates.
• Very versatile.
• NEO Industrial Aluminium is a universal product for the farmer for use on fences, the engineer for his steel structures, pipes and tanks and the paint contractor for use around buildings.
• Two coats of NEO Industrial Aluminium are used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Industrial Aluminium is ready for use un-thinned; thinning with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00) will reduce its hiding power. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). |
| • Cleaning | NEO Mineral Turpentine (mt00). |
| • Application | • Stir well before use. • Substrate must be dry, clean and free of dust. • NEO Industrial Aluminium is ready for use un-thinned; thinning will reduce its hiding power. • Two coats of NEO Industrial Aluminium are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Industrial Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 18-24 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Clean up application equipment with NEO Mineral Turpentine (mt00). • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 8-10 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Only apply in well ventilated areas and keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corroguard (cg00). • With brush, roller or airless spray, apply a generous coat of NEO Industrial Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 18-24 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) | • Abrasively degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying the whole substrate is coated with NEO Corroguard (cg00). • With brush, roller or airless spray, apply a generous coat of NEO Industrial Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 18-24 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Industrial Aluminium is available in shiny Aluminium only.
• Available in 500ml, 1
Precautions
• NEO Industrial Aluminium is highly flammable and has a flashpoint of 37 degrees Celsius.
• Only apply in well-ventilated areas.
• Do not eat, drink or smoke while applying.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
INDUSTRIAL PLASTIC
IN00
A classic vinyl solution copolymer based gloss coating for interior/exterior use. The coating is highly abrasion, chemical, and water resistant.
Application Areas
- The product can be applied to nearly any substrate like plaster, concrete, fiber cement, wood, chipboard paneling, primed steel and galvanized metal.
- Dry (moisture level 15% maximum) plaster, concrete and fibre cement.
- Primed metal and wooden substrates.
- NEO Industrial Plastic is widely used by fish processors as a protective coating for walls and fiber cement ceilings.
- The product is also ideal for bathroom and shower cubicle coatings.
Product Data
| Resin Base | Vinyl copolymer |
| Drying Time | Touch dry: 1 hour Hard dry: 2-3 hours |
| Solid Matter by Content | By volume: 33,2% By mass: 52% |
| Film Thickness | ± 35 microns |
| Spreading Rate | 7-9 square metres per 1 litre Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 8-10 square metres per litre for subsequent coats and for when applied to sealed, previously painted substrates. |
| Surface Appearance | Glossy. |
Product Features
- Highly washable, cleanable, humidity and abrasion resistant as well as durable for the harsh Namibian coastal climate.
- Excellent adhesion to a range of properly prepared, dry flooring substrates.
- Excellent, no mess application properties with excellent flow and leveling.
- High hiding power and film build.
- Alkali, mild acid, mineral oils and cleaning detergents resistant.
- Fungus resistant.
- 2 Coats of NEO Industrial Plastic are used for best results.
Application Details
| Mixing | Always stir well before use with a flat paddle. |
| Application Method | Brush, roller or airless spray. |
| Thinning | NEO Enamel Thinner – do not add more than 5% thinner for the application. |
| Cleaning | Clean up application equipment with NEO Enamel Thinner. |
| Application |
|
Surface Preparation
| Rusted Metal |
|
| New Metal |
|
| Fibre Cement and Wood |
|
| New Plaster or Concrete |
|
| Previously Painted Surfaces |
|
Colour Range and Quantities
- Limited range of
colours namely white, ivory, cream - Any other colors from our large variety of shades available on request in minimum batch quantities (200 liters and more).
- Available in 1 litre, 5 litres and 20 litres.
Precautions
- This material is highly flammable and has a flashpoint of 37 degrees Celsius.
- Only apply in well-ventilated areas.
- Do not eat drink or smoke while applying.
- NEO Industrial Plastic must never be applied to substrates or objects where the temperature whilst in service exceeds 80 degrees Celsius.
- This paint coating is thermoplastic.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
EPOXY ENAMEL
2 COMPONENT
EE00
A classic twin pack, epoxy based, polyamide cured, long-life, interior, abrasion resistant, high gloss coating for those high traffic areas that need a
Application Areas
• Interior use only.
• Dry plaster or concrete substrates.
• Primed metal and wooden substrates.
• It is ideal to protect machinery, plant
Product Features
• Highly abrasion and chemical resistant.
• Highly washable and cleanable.
• Excellent adhesion to range of properly prepared substrates.
• High hiding power and film build.
• NEO Epoxy Enamel is based on pure epoxy resin cured with a polyamide resin. It is a twin pack system. The catalyst must be added to the paint base before use and stirred well. A 5-litre pack consists of approximately 4 litres base paint and approximately 1 litre catalyst. Once mixed, the paint must be used within 6-8 hours. The higher the temperature, the faster the reaction between the paint base and the activator. At low temperatures the reaction between the paint base and activator is slowed down considerably and it may take days before the coating gets hard.
• NEO Epoxy Enamel forms a very hard and dense coating. It is resistant against alkalis, mild acids, water and mineral oil substances. Epoxy coatings are used to protect machinery and plant in aggressive environments such as fish processors, mines, tanneries, and meat processing plants.
• Two coats of NEO Epoxy Enamel are used for best results.
• Epoxy coatings are not suitable for exterior use since they will deteriorate in UV light.
• NEO Epoxy Enamel cannot be applied on existing gloss or
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, mohair paint roller or airless spray. |
| • Thinning | NEO Epoxy Enamel is ready for use un-thinned; thinning with NEO Epoxy Thinner (et02) will reduce its effectiveness. Only for spray application, thin to 20-25 |
| • Cleaning | NEO Epoxy Thinner (et02). |
| • Application | • Stir well before use. • NEO Epoxy Enamel is ready for use un-thinned; thinning with NEO Epoxy Thinner (et02) will reduce its effectiveness. Only for spray application, thin to 20-25 • Two coats of NEO Epoxy Enamel are used for best results. • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes Epoxy base to 1 volume polyamide curing agent. Mix for 5 –10 minutes. • With brush, mohair roller or airless spray, apply a generous coat of NEO Epoxy Enamel. Only for spray application, thin to 20-25 • Allow to dry 18-24 hours, but no longer than 48 hours, before recoating. • Epoxy coatings must be used within a strict time sequence. Each coating must be applied within 48 hours after the previous one; otherwise there will be no proper bond between the coatings. • With brush, mohair roller or airless spray, apply a second generous coat of NEO Epoxy Enamel. • Clean up application equipment with NEO Epoxy Thinner (et02). • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • For interior use only. • Only apply in well ventilated areas. • Keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corrotec (ct00). • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes Epoxy base to 1 volume polyamide curing agent. Mix for 5 –10 minutes. • With brush, mohair roller or airless spray, apply a generous coat of NEO Epoxy Enamel. Only for spray application, thin to 20-25 sek. No. 4 Ford cup with NEO Epoxy Thinner (et02). • Allow to dry 18-24 hours, but no longer than 48 hours, before recoating. • Epoxy coatings must be used within a strict time sequence. Each coating must be applied within 48 hours after the previous one; otherwise there will be no proper bond between the coatings. • With brush, mohair roller or airless spray, apply a second generous coat of NEO Epoxy Enamel. |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying, the whole substrate is coated with NEO Corrotec (ct00). • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes Epoxy base to 1 volume polyamide curing agent. Mix for 5 –10 minutes. • With brush, mohair roller or airless spray, apply a generous coat of NEO Epoxy Enamel. Only for spray application, thin to 20-25 sek. No. 4 Ford cup with NEO Epoxy Thinner (et02). • Allow to dry 18-24 hours, but no longer than 48 hours, before recoating. • Epoxy coatings must be used within a strict time sequence. Each coating must be applied within 48 hours after the previous one; otherwise there will be no proper bond between the coatings. • With brush, mohair roller or airless spray, apply a second generous coat of NEO Epoxy Enamel. |
| • Dry, Uncoated and New Concrete Surfaces • Raw / New Plaster |
• Make sure concrete is firm and completely dry as water vapour cannot permeate through epoxy coatings. • Remove all dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with NEO Aurora Filler (ef00) or NEO Repair Paste (nrp07). • Apply one coat of NEO Bonding Liquid (ig00) to cover NEO Aurora Filler (ef00) or NEO Repair Paste (nrp07). • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes Epoxy base to 1 volume polyamide curing agent. Mix for 5 –10 minutes. • With brush, mohair roller or airless spray, apply a generous coat of NEO Epoxy Enamel. Only for spray application, thin to 20-25 sek. No. 4 Ford cup with NEO Epoxy Thinner (et02). • Allow to dry 18-24 hours, but no longer than 48 hours, before recoating. • Epoxy coatings must be used within a strict time sequence. Each coating must be applied within 48 hours after the previous one; otherwise there will be no proper bond between the coatings. • With brush, mohair roller or airless spray, apply a second generous coat of NEO Epoxy Enamel. |
| • Previously Epoxy Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Epoxy enamel does not adhere well on hard and fully cured epoxy coatings. The old coating must be prepared by sanding the product well to a matt and slightly rough surface. • After drying over night all primed areas and previously painted areas must then be overcoated with NEO Bonding Liquid (ig00). • Mix the epoxy base with the polyamide curing agent in the correct ratio: 4 volumes Epoxy base to 1 volume polyamide curing agent. Mix for 5 –10 minutes. • With brush, mohair roller or airless spray, apply a generous coat of NEO Epoxy Enamel. Only for spray application, thin to 20-25 sek. No. 4 Ford cup with NEO Epoxy Thinner (et02). • Allow to dry 18-24 hours, but no longer than 48 hours, before recoating. • Epoxy coatings must be used within a strict time sequence. Each coating must be applied within 48 hours after the previous one; otherwise there will be no proper bond between the coatings. • With brush, mohair roller or airless spray, apply a second generous coat of NEO Epoxy Enamel. • NEO Epoxy Enamel cannot be applied on existing gloss or semi gloss enamel paints. |
Colour Range and Quantities
• NEO Epoxy Enamel is available in a range of popular
• Other shades are available on request in minimum batch quantities.
• Available in 1
Precautions
• NEO Epoxy Enamel is highly flammable.
• Use only in well ventilated areas and do not eat, drink or smoke during application.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
TENNIS COURT PAINT
EPD00
A new generation, water-based, 100% acrylic, long-life, exterior, low sheen, no skid coating for cement, concrete and asphalt tennis courts.
Application Areas
• Interior and exterior use.
• Dry (15% moisture maximum) concrete or cement tennis courts/substrates.
• Settled, well dried (1-2 weeks) freshly laid asphalt tennis courts/substrates.
Product Features
• NEO Tennis Court Paint is highly durable, water and UV resistant for the harsh Namibian climate.
• Highly washable and abrasion resistant.
• Excellent adhesion.
• Low odour.
• Two coats of NEO Tennis Court Paint must be applied for proper durability.
• If required, the paint surface can be cleaned with a high pressure cleaner as well as normal household detergents.
• NEO Tennis Court Paint has a nearly matt non-skid surface.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush or roller application. |
| • Thinning | NEO Tennis Court Paint is ready for use un-thinned; thinning with water will reduce its hiding power. |
| • Cleaning | Water. |
| • Application | • Stir well before use. • The concrete surface must be completely dry before paint application. • Do not apply on a hot surface. • Two coats of NEO Tennis Court Paint are used for best results. • With a brush or roller, apply a generous coat of NEO Tennis Court Paint. • Allow to dry 2 hours before recoating. • With a brush or roller, apply a second generous coat. • NEO Tennis Court Paint is ready for use un-thinned; thinning with water will reduce its hiding power. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Clean up application equipment with clean tap water. • Use NEO Dur (ep00) for the white line markings. • Although the paint is water resistant it is advised to remove remaining water with a broom from the paint surface after a good rain. Water should not stand for days on the court. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Uncoated, Dry Concrete or Cement surfaces | • The concrete floor must be firm and dry. • Remove dust, foreign material, fungal and algae growth. • For any required repair work make use of NEO Repair Paste (nrp07). • Apply one coat of NEO Bonding Liquid (ig00) to cover NEO Repair Paste (nrp07). • With a brush or roller, apply a generous coat of NEO Tennis Court Paint. • Allow to dry 2 hours before recoating. • With a brush or roller, apply a second generous coat. |
| • Asphalt Surfaces (Uncoated, Weathered or New) | • Remove dust, foreign material, fungal and algae growth. • Asphalt contains certain organic solvents, which should evaporate before the paint application. • Newly laid asphalt surfaces should rest for a week or two before starting to paint. • With a brush or roller, apply a generous coat of NEO Tennis Court Paint. • Allow to dry 2 hours before recoating. • With a brush or roller, apply a second generous coat. |
| • Previously Painted Surfaces | • Remove all loose, flaking and bubbling paint. • Remove dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with NEO Repair Paste (nrp07). • Apply one coat of NEO Bonding Liquid (ig00) to cover NEO Repair Paste (nrp07). • Allow to dry. • With a brush or roller, apply a generous coat of NEO Tennis Court Paint. • Allow to dry 2 hours before recoating. • With a brush or roller, apply a second generous coat. |
Colour Range and Quantities
• NEO Tennis Court Paint is available in Green and Terra Cotta only.
• Available in 1
Precautions
• NEO Tennis Court Paint is not flammable.
• It contains no toxic substances and very low levels of VOC (EU regulations).
• Do not allow rain water to sit on the painted court for long periods after heavy rain.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
REFLECTIVE ALUMINIUM
RA00
A new generation acrylic resin based, long-life, interior/exterior, high shine aluminum coating for industrial installations such as petrol and other storage tanks and structural steelwork that need a highly durable corrosion resistant aluminum finish. The coating has excellent weather, humidity
Application Areas
• Interior and exterior use.
• Primed metal substrates.
• NEO Reflective Aluminium can be used in industrial and coastal environments.
Product Features
• Highly durable and UV resistant for the harsh Namibian climate.
• Highly humidity, weather and chemical resistant.
• Excellent adhesion to range of properly prepared substrates.
• Very versatile.
• NEO Reflective Aluminium can easily be recoated without extensive preparations.
• The coating has a good heat resistance for temperatures up to 150 degrees Celsius.
• Two coats of NEO Reflective Aluminium are used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Reflective Aluminium is ready for use un-thinned; thinning with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00) will reduce its hiding power. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). |
| • Cleaning | NEO Enamel Thinner (et01). |
| • Application | • Stir well before use. • NEO Reflective Aluminium is ready for use un-thinned; thinning will reduce its hiding power. • Two coats of NEO Reflective Aluminium are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Reflective Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Clean up application equipment with NEO Enamel Thinner (et01). • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 8-10 square metres per litre for the first coat and 10-12 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • Only apply in well ventilated areas and keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned / sand blasted back to bright metal and spot primed with NEO Corroguard (cg00) or NEO Corrotec (ct00). For coastal regions, use two coats of primer. • With brush, roller or airless spray, apply a generous coat of NEO Reflective Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) | • Abrasively degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying the whole substrate is coated with NEO Corroguard (cg00) or NEO Corrotec (ct00). • With brush, roller or airless spray, apply a generous coat of NEO Reflective Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Primed Metal or Surfaces Previously Coated with Aluminium | • The existing paint coating should adhere well to the substrate. • Remove all peeling and flaking paint. • Remove dust, salt deposits and any mineral oil or greasy substances. • If possible make use of a high pressure cleaner to prepare surface. • Bare metal areas need to be spot primed with NEO Corroguard (cg00) or NEO Corrotec (ct00). • Allow to dry. • With brush, roller or airless spray, apply a generous coat of NEO Reflective Aluminium. Only for spray application, thin 20% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Reflective Aluminium is available in shiny Aluminium only.
• Available in 5 litres and 20 litres.
Precautions
• NEO Reflective Aluminium is highly flammable and has a flashpoint of 37 degrees Celsius.
• Only apply in
• Do not eat, drink or smoke while applying.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
ROOF PAINT
AR00
NEO Roof Paint is a water-based, acrylic, durable roof coating.
Application Areas
• Cement tiles, new or weathered.
• Fibre cement sheeting, new or weathered.
• Plaster.
• Previously painted substrates.
• Primed metal and wooden substrates.
Product Features
• NEO Roof Paint is highly durable and UV resistant for the harsh Namibian climate.
• Highly water resistant.
• Excellent adhesion.
• Low
• Quick drying – two coats can be applied in one day.
• If correctly applied to a properly prepared substrate, the product has a life expectancy of 5 to 7 years, possibly longer.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Roof Paint is ready for use un-thinned; thinning with water will reduce its hiding power. |
| • Cleaning | Water. |
| • Application | • Stir well before use. • Two coats of NEO Roof Paint are used for best results. • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 6-8 square metres per litre for the first coat and 8-10 square metres per litre for subsequent coats and when applied to sealed, previously painted substrates. • NEO Roof Paint is ready for use un-thinned; thinning with water will reduce its hiding power. • Clean tools immediately after use with clean tap water. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corroguard (cg00). Use two coats of NEO Corroguard (cg00) in coastal regions. • Remove collected sand and dust from the roof. • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • Wash down complete roof with a mixture of one part NEO Metal Conditioner (mc00) and three parts of water. • Rinse well with potable water. • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • No primer is required BUT one to two coats of NEO Corroguard (cg00) are recommended for the very harsh coastal regions. • Acrylic resin emulsions adhere excellently on to galvanised metal. |
| • Uncoated cement tile surfaces | • Remove dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with NEO Repair Paste (nrp07). • Apply one coat of NEO Bonding Liquid (ig00) to cover NEO Repair Paste (nrp07). • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
| • Fibre Cement Surfaces (Uncoated, Weathered or New) | • Remove dust, foreign material, fungal and algae growth. • If friable or powdery, seal with NEO Bonding Liquid (ig00). • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • Can be applied directly on to the fibre cement surface. |
| • Roofing Felt | • NEO Roof Paint can be applied directly on to the roofing felt surface. • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. • In general there are no problems to be encountered when painting new material. • Old roofing felt where the paint coating is flaking and loose can be difficult to repaint. With such roofs, expert advice is required to assess the condition of the roofing felt. |
| • Previously Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Allow to dry. • If then powdery or friable, seal with NEO Bonding Liquid (ig00). • With brush, roller or airless spray, apply a generous coat of NEO Roof Paint. • Allow to dry 4-6 hours before recoating. • With brush, roller or airless spray, apply a second generous coat. |
Colour Range and Quantities
• NEO Roof Paint is available in Rooftile Red, Green Roof
• Available in 5
Precautions
• NEO Roof Paint is not flammable, contains no toxic substances and only low levels of VOC (EU regulations).
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
SCHOOLBOARD PAINT
SB00
A classic alkyd based schoolboard paint
Application Areas
- Hardboard and fiber cement boards.
- Primed wood and metal substrates.
- The application of NEO Schoolboard Paint is NOT possible on factory made school boards with a baked enamel finish.
Product Data
| Resin Base | Synthetic Alkyd resin |
| Drying Time | Touch dry: 1-2 hours Hard dry: 3-4 hours |
| Solid Matter by Content | By volume: 45% By mass: 68% |
| Film Thickness | ± 30 microns |
| Spreading Rate | ± 9 square metres per litre. Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 7-9 square |
| Surface Appearance | Matt. |
Product Features
- A quick drying and slightly coarse coating suitable for clear and visible writing when chalk is used.
- Excellent adhesion and hiding power.
- Excellent no mess application properties.
- Can be cleaned with normal house hold cleaners on a regular basis.
Application Details
| Mixing | Always stir well before use with a flat paddle. |
| Application Method | Brush, roller or spray application. |
| Thinning | NEO Enamel Thinner – do not add more than 5% thinner for the application. |
| Cleaning | NEO Schoolboard Paint is ready for use un-thinned; thinning with NEO Enamel Thinner will reduce its hiding power. NEO Enamel Thinner |
| Application |
|
Surface Preparation
| Mild Steel (Renovation) |
|
| Mild Steel (New) |
|
| Fibre Cement Surfaces (Uncoated, Weathered or New) |
|
| Raw / New Plaster |
|
| Dry, Uncoated Concrete Surfaces (Interior Walls Only) | |
| • Previously Painted Surfaces (Interior Walls Only) |
Existing PVA and Eggshell paint
|
| Soft Board, Gypsum Board, Wood fiber Boards, Wall Partitioning, Solid Wood |
|
Colour Range and Quantities
- NEO Schoolboard Paint is available in green only.
- Available in 1 liter, 5 liters.
Precautions
- NEO Schoolboard Paint is highly flammable and has a flashpoint of 37 degrees Celsius.
- Use only in well-ventilated areas and do not eat, drink or smoke during application.
- This product contains no harmful or toxic solvents or substances.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
SWIMMINGPOOL PAINT
SP00
A new generation modified chlorinated polymer swimming pool paint for Marbalite and smooth-walled (concrete or plastered) swimming pools. This product is resistant to the usual pool chemicals such as hydrochloric acid and chlorine.
Application Areas
• New cement or plastered pools.
• New and aged Marbalite pools.
• Pools previously coated with a chlorinated rubber coating (does the previous coating soften back when rubbed with a cloth damped with NEO Enamel Thinner (et01) ?).
• NEO Swimming pool Paint can NOT be applied over epoxy or glass fiber pools/surfaces.
Product Features
• Highly durable and water resistant for the harsh Namibian climate.
• Excellent adhesion to Marbalite and pools previously coated with chlorinated rubber.
• Resists algae growth.
• Two coats of NEO
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush or roller application. |
| • Thinning | NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). |
| • Cleaning | NEO Enamel Thinner (et01). |
| • Application | • Stir well before use. • Ensure that surface is completely dry. • Two coats of NEO Swimmingpool Paint are used for best results. • Apply the first coat of NEO Swimmingpool Paint thinned 10% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Apply the second coat undiluted. • Clean up application equipment with NEO Enamel Thinner (et01). • Do not smoke, drink or eat whilst using or applying this product. • Avoid inhaling of solvent vapours during application. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply in direct sunlight. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. • NEO |
Surface Preparation
| • Dry (15% Moisture Maximum) New Plaster or Concrete | • Make sure concrete is firm and completely dry. • Remove all dust, foreign material, fungal and algae growth. • Fill and seal all visible cracks with a suitable sealant. • Apply the first coat of NEO Swimmingpool Paint thinned 10% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry for 2 days. • Spray water over the entire primed surface, drain pool and allow to dry for 2 days. Watch for bubbles or blisters. If they occur, then more than likely the substrate was not dry or there is a back pressure of water in the area. Either way, coating such a pool will give difficulties. • Apply the second coat undiluted. • Allow 5-7 days after the last coat is applied before the pool is refilled with water. |
| • Surfaces Previously Painted with Chlorinated Rubber | • Remove all loose, flaking and bubbling paint. • Remove all dust, foreign material, fungal and algae growth. • Sand damaged areas well, wash down and allow to dry overnight. • Apply the first coat of NEO Swimmingpool Paint thinned 10% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Apply the second coat undiluted. |
| • Marbalite | • For Marbalite, the surface must be firm and free of loose dust. • If, as for many pools, the Marbalite surface is glass smooth, it must be acid washed as follows: o Wear gloves and goggles while mixing and applying acid. o Make up acid wash by mixing 3 parts pool acid to 7 parts water. o Use a mop to apply the acid wash. o Leave on the Marbalite for 10-15 minutes. o Rinse off with clean water at least 3 times. • Apply the first coat of NEO Swimmingpool Paint thinned 10% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Apply the second coat undiluted. |
| • Treating Cracks in Pools | • Widen the cracks with a disk-grinding machine using a cutting blade for mortar and concrete. • Cut the crack open at least 5 mm wide and 10 to 15 mm deep. • Fill up this crack with an acrylic sealant, applied from a dispensing tube directly into the widened crack. • Do not use silicon sealant since no paint will adhere to it. • Sand the hardened surface and apply the first coat of NEO Swimmingpool Paint thinned 10% with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Apply the second coat undiluted. |
Colour Range and Quantities
• NEO
• Available in 1 liter, and 5 liters
Precautions
• NEO
• Do not smoke, drink or eat whilst using or applying this product.
• Ventilate well and avoid inhaling of solvent
• Solvent
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.
TRUCK ENAMEL
TE00
A classic, short oil, alkyd based, long-life, exterior, gloss coating for agricultural and commercial equipment/vehicles (tractors, earth moving equipment, trucks, and motorcars) that need a long lasting, hard and highly washable/scratch resistant coating in a range of
Application Areas
• Primed metal.
• Previously painted substrates.
Product Features
• High durability for the harsh Namibian climate.
• Highly washable, cleanable, humidity and scratch resistant.
• The product retains toughness and will not chip easily. This is important for vehicles being used on construction sites loading gravel and similar products.
• Excellent adhesion to a range of properly prepared substrates.
• High hiding power and film build.
• NEO Truck Enamel is available in several popular shades in which earth moving machinery and tractors are supplied. For safari and hunting companies a matt camouflage olive green is produced.
• NEO Paints offers a hardener additive for the NEO Truck Enamel. When added, the coating obtains an exceptional hardness similar to a baked enamel finish. The resistance against sunlight and consequent fading will be improved considerably. The addition of the hardener for trucks and motorcars is recommended where a
• Two to three coats of NEO Truck Enamel are used for best results.
Application Details
| • Mixing | Always stir well before use with a flat paddle. |
| • Application Method | Brush, roller or airless spray. |
| • Thinning | NEO Truck Enamel is ready for use un-thinned; thinning with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00) will reduce its effectiveness. Only for spray application dilute |
| • Cleaning | NEO Enamel Thinner (et01). |
| • Application | • Stir well before use. • Two to three coats of NEO Truck Enamel are used for best results. • With • Allow • With • Clean up application equipment with NEO Enamel Thinner (et01). • Although the spreading rate will vary with porosity and type of substrate, for uncoated new surfaces work on 8-10 square • Only apply in • This material is highly flammable. Keep away from all ignition sources, flames and sparks. • Do not eat, drink or smoke while applying. • Do not apply before 09:00 and after 16:00 in the winter. • Do not apply exterior if it looks like rain will occur within 4-6 hours of application. |
Surface Preparation
| • Mild Steel (Renovation) | • Affected areas need to be cleaned back to bright metal and spot primed with NEO Corrotec (ct00). • Remove any rust and mill scale from metal surface. • Prime metal with one coat of NEO Corrotec (ct00). • With brush, roller or airless spray, apply a generous coat of NEO Truck Enamel to the area that needs protecting. Thin for spray to 20-25 seconds Ford 4 cup with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 6-8 hours before recoating. • With brush, roller or airless spray, apply a second and/or third generous coat as required. |
| • Mild Steel (New) | • Degrease surfaces with NEO Metal Conditioner (mc00) to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water break free. • After drying, the whole substrate is coated with NEO Corrotec (ct00). • With brush, roller or airless spray, apply a generous coat of NEO Truck Enamel to the area that needs protecting. Thin for spray to 20-25 seconds Ford 4 cup with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 6-8 hours before recoating. • With brush, roller or airless spray, apply a second and/or third generous coat as required. |
| • Previously Painted Surfaces | • Make sure old paint coatings are firm and solid. • Remove all loose, flaking and bubbling paint. • Remove all dust, grease, foreign material, fungal and algae growth. • Allow to dry. • Fill all damaged areas with polyester body filler and allow to dry. • Sand down existing surface with fine waterproof sandpaper until completely matt. • With brush, roller or airless spray, apply a generous coat of NEO Truck Enamel to the area that needs protecting. Thin for spray to 20-25 seconds Ford 4 cup with NEO Enamel Thinner (et01) or NEO Quick Enamel Thinner (qe00). • Allow to dry 6-8 hours before recoating. • With brush, roller or airless spray, apply a second and/or third generous coat as required. |
Colour Range and Quantities
• NEO Truck Enamel is available in a range of ready mixed
• Available in 1 liter and 5 liters.
Precautions
• NEO Truck Enamel is highly flammable. Keep away from all ignition sources, flames and sparks.
• Only apply in well-ventilated areas.
• Avoid inhaling vapors in high concentration during application.
• Wear protective clothing when spraying the paint.
• Do not eat, drink or smoke while applying.
Disclaimer
NEO Paints can not be held liable if the product fails due to improper surface preparation or application.